Tips for Ethernet Cabling

Just about everyone has come into contact with an Ethernet cable at some point in their lives. If you have a high-speed Internet connection at home, then you are connected to your Internet modem through an Ethernet wire. Those networking cables you see running around your office at work are also the same protocol as the cables at home. When you are getting ready to buy or use Ethernet wiring, there are some tips you should keep in mind that will help you to create a better network and get more efficient use from your Internet and company networking connection.
Network cabling comes in a variety of colours to help people separate the cables that go to different parts of a building. If you know that you will need a 50 metre Ethernet cable to connect your computer to your home router, and you already have three computers connected, then the idea of having to walk back and forth to connect or disconnect your computer is probably not appealing to you. When you have your cabling colour coded, then you can see which cables go to which computers. This is also helpful in corporate networks that have hundreds of users.
Shielded network wires are sometimes a little more expensive than non-shielded ones, but the extra cost is worth it. A shielded Ethernet cable has special insulation around the copper wiring that can prevent things like radio signals or wireless computer networking signals from corrupting your flow of data. If you have a situation where there is a lot of electronic interference in the air from various sources, then a shielded cable is going to be necessary to make sure that your information gets from point A to point B successfully. Without a shielded wire, you could risk losing some or all of your information with each transfer.
If you have to run network wiring over a floor that experiences any kind of foot traffic, then it is best to use a cable channel. A cable channel is made of a material that feels like rubber and it has a channel running down the middle of it. The flat top of the channel makes it easy for people to walk over the cable without tripping. The channel also protects Ethernet cables from being stepped on and compromised. You should always try to run your cable around and under furniture if possible. But if the wire is out in the open, then use a cable channel to protect it.